Wednesday, 24 December 2014

Central Qld Coal: Mining for Needed Investments

The Central Qld Coal Project is situated in the Galilee Coal Basin, Central Queensland with the purpose of establishing a mine to service international export markets for thermal coal. An estimated cost to such a project would be around $ 7.5 billion - the amount proves that the mining industry is one serious business to begin with.

In addition to the mine, the Central Qld Coal Project also proposes to construct a railway, potentially in excess of 400km depending on the final option: Either to transport processed coal to an expanded facility at Abbot Point or new export terminal to be established at Dudgeon Point. However, this would require new major water and power supply infrastructure to service the mine and port - hence, the extremely high cost. Because mining areas usually involve desolate areas where there is no direct risk to developed regions where the populace thrives, setting up new major water and power supplies would simply demand costs as high as the estimated cost - but this is not the only major percent of the whole budget of the Central Qld Coal Project.

The location for the Central Qld Coal Project is situated 40km northwest of Alpha, approximately 450 km west of Rockhampton and contains an amount of more than three billion tons. The proposed open-cut mine of the Central Qld Coal Project is expected to be developed in stages. It shall have an initial export capacity of 30 million tons per annum with a mine life expectancy of 30 years.

In terms of employment regarding Central Qld Coal Project, there will be around a total of 2,500 people to be employed during the construction and 1,600 permanent positions shall be employed in the operation stage of the Central Qld Coal Project.

Australia is a major coal exporter - the largest exporter of coal and fourth largest producer of coal. Australia is also the second largest producer of gold, second only to China. As for Opal, Australia is responsible for 95% of its production, thereby making her the largest producer worldwide. Australia would not also lose in terms of commercially viable diamond deposits - being third next after Russia and Botswana. This pretty much explains the significance of the mining industry to Australia. It is like the backbone of its economy; an industry focused on claiming the blessings the earth has giver her lands. The Central Qld Coal Project was made to further the exports and improve the trade. However, the Central Qld Coal Project requires quite a large sum for its project. It is only through the financial support of investments, both local and international, can it achieve its goals and begin reaping the fruits of the land.

Source: http://ezinearticles.com/?Central-Qld-Coal:-Mining-for-Needed-Investments&id=6314576

Wednesday, 17 December 2014

Data Entry Services has Tremendous Potential

Running a business is not a very difficult thing to do, but running it successfully surely needs some tremendous efforts on your part. There are many things that need to be handled properly for a business to be successful. Data entry is one of the vital elements for running a business successfully. Data entry is small but nonetheless very significant aspect of a business which one needs to take care of. Outsourcing is a business process which is increasingly being used by businesses to take care of the data entry aspect. In fact the process of outsourcing has made things simpler for business owners.

Data entry services are provided by several companies who are involved in outsourcing work. Such companies specialize in providing different types of services including data entry services to companies that are looking for professional support to unburden from the heavy workload that they have. For the smooth running and proper management of any type of business getting data entry done in a proper manner is crucial. So if you own a business and want to manage it properly you must opt for hiring data entry services for your business.

Each business is different and the business needs also differ vastly. So depending on the type of business which you run you can hire data entry services accordingly. You may need data entry services of different types like offline or online data entry, insurance claim entry, banking information entry and building up a huge database with various other types of entry. The demand for data entry is increasing gradually day by day and in present time it has turned out to be very lucrative as well.

Always hire data entry services from outsourcing companies that provide you with services of extremely talented professionals. You are spending huge amount of money and for no reason must you settle for anything less. Talking with someone who has already used such services help a great deal as they can tell you exactly what the advantages and disadvantages are of using the data entry service. You can get customized services for small, mid size and large scaled business from the companies which provide data entry services. Data entry is not a complicated application but it is extremely time consuming and this is one of the major reasons why a business must undertake data entry services.

Each business has different things to take care of and they cannot afford to waste such valuable time in data entry work. Professionals that work for data entry are specially trained to suit the requirements of particular businesses. So you do not have to worry if the company which is providing data entry services will be able to do the work as per your needs or not. You can just hire data entry services and rest easy, all your work will be done efficiently by the professionals working there.

Data entry services has received tremendous boost and this is one aspect of business which is there to stay for a long time. So hiring data entry services for your business will be just perfect.

Source:http://ezinearticles.com/?Data-Entry-Services-has-Tremendous-Potential&id=472028

Friday, 12 December 2014

Top 8 Benefits of Outsourcing Data Entry Services to India

Processing and digitizing data is essential across most businesses these days. Digitizing data, either through manual data entry or document process automation, provides easy access to information and enhances operational efficiencies. While most business firms acknowledge the importance of data for their business operations, the scarcity of manpower to organize their own information bank poses a challenge. When data from over a million documents needs to be captured and entered into an application, the requirement for personnel and resources would be considerable. Most often, companies hit a roadblock as this is not a viable option and it would hinder the progress of their core business strategy.

Numerous companies across the globe see value in partnering with a professional data entry services provider. Companies who outsource their data entry tasks have varied requirements: data entry from scanned invoices, scanned records, product catalogs, images, online research, forms, charts, data conversion, data processing, extracting data from various sources, and others.

According to an article on Forbes.com by Bain & Company, outsourcing and offshoring have gone beyond being just cost-cutting measures. They are used for more strategic ends by companies, for capabilities that are not possessed or which need to be strengthened.

Benefits of Choosing the Right Data Entry Outsourcing Company

•    Smart Partnerships: Experienced outsourcing companies have the flexibility to scale their services and customize them according to individual client requirements. Connecting with the right professional data entry service provider enables outsourcers to have an effective and sustainable relationship, that can grow over the long term.

•    Focus on Core Competency: Most businesses have core and non-core processes. Implementing non-core processes, like data entry, in-house can add tremendous operational costs in terms of hiring process executives who need to have exceptional typing speeds, renting or buying more office space, recruiting managers, deploying new technology, payment of bonuses, and many more hidden expenses. Outsourcing data entry services relieves outsourcers from all the above hassles and enables them to focus on their core competency. This can result in higher operational profits and improved business efficiencies.

•    Access to Better Talent: By outsourcing, data entry outsourcers have access to the best talent available. Experienced BPO companies understand the importance of recruiting the right people for the job in order to offer exemplary service to their clients in this competitive market. A professional data entry service provider will ensure that the company has the best resources.

•    Access to Latest Technology: It has become essential for professional BPO companies to upgrade to the latest technological offerings in order to provide high performance services. The right technology enables faster and quicker service. By investing time in finding the right service partner, outsourcers can save the cost of investing in technology in-house.

•    Mitigating Risk: A key reason that drives most companies to outsource is to mitigate risk. In this ever-changing business landscape, it may not be feasible for companies to invest in technology, resources and infrastructure that could become obsolete quickly. Outsourcing smartly helps companies to mitigate risk of obsolescence and seek sustainable growth. The risk of errors in data processing is also reduced when the task is handled by an experienced data entry service provider.

•    Improved Productivity: Outsourcing data entry services to a location like India, which is 10-12 hours ahead of countries like the US and Canada, has proven to be very efficient in improving productivity and increasing volumes of transactions. With the help of after-hours data entry support, global companies can accelerate their business and operational cycles and deliver quicker services to clients.

•    Competitive Advantage: To keep ahead of the competition, businesses need to take smart strategic decisions. For sustainable operations, it has become imperative for businesses to outsource non-core processes, like data entry, scanning, payroll, bookkeeping and more.

•    Lower Operational Costs: Lowering operation costs is an objective all businesses work towards. Outsourcing data entry helps outsourcers to save costs related to labor, infrastructure, business operations, technology and more.

•    Challenges to Overcome

•    Though there are plenty of advantages of outsourcing data entry services, there are a few challenges that companies must take into consideration. These need to be addressed carefully to ensure a foolproof outsourcing strategy is in place.

•    Loss of Control: Outsourcers must pay close attention to the processes that are being outsourced. Inaccurate data entry can result in increased error rate and lower efficiency of business operations. Deploying knowledgeable staff to communicate with and oversee the operations at the outsourcing company can help keep control over performance, error rate and productivity.

•    Communication Gap: Cultural and language differences with off-shore outsourcing destinations make it necessary for companies to adapt strategies accordingly. Strong training practices for data entry process executives of the service provider can ensure smoother operations and a hassle-free partnership.

•    Data Security: When companies share critical data with their outsourcing partner, they must ensure the outsourcing company has strict security guidelines and the right technology in place to avoid information leakages. Having an ISO 27001 certified data entry service provider as a partner is strongly recommended as a long-term business strategy.

By carefully selecting a data entry service provider, companies can find tremendous value in an outsourcing partnership. With relevant and accurate data at their fingertips, the true potential of their business operations can be attained.

Source:http://www.invensis.net/blog/bpo/top-8-benefits-outsourcing-data-entry-services-india

Thursday, 11 September 2014

Web Data Extraction / Scraping Data from Kitco Inc. Text Only Market Page

I wish to capture data from

<html>
<head>
<title>Text Only Market Page</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>

<body bgcolor="#FFFFFF">
<br><br>
<pre>
<b><font size=6>
  Kitco Inc.

  Text Only Market Page</font></b>

    <a href="http://www.kitco.com/market/">Graphic version of this page</a>

    <a href="http://www.kitco.com/market/LFrate.html">Precious Metals Lease Rates</a> 
    <a href="http://www.kitco.com/gold.londonfix.html">Historical Price Data</a> 
    <a href="http://www.kitco.com/market/marketnews.html">Precious Metals News Headlines</a>

    <font size=4><b><a href="https://online.kitco.com/bullion/completelist_USD.html#gold">Buy gold and silver online direct from Kitco!</a>
   Live quotes for all bullion products.</b></font>


   --------------------------------------------------------------------------------
   London Fix          GOLD          SILVER       PLATINUM           PALLADIUM
                   AM       PM                  AM       PM         AM       PM
   --------------------------------------------------------------------------------
   Jun 19,2012   1628.50   1625.50   28.8100   1486.00   1486.00   629.00   634.00 
   Jun 18,2012   1623.50   1615.50   28.4300   1486.00   1484.00   626.00   628.00 
   --------------------------------------------------------------------------------


                  New York Spot Price
                MARKET IS OPEN
            Will close in 4 hour 25 minutes
   ----------------------------------------------------------------------
   Metals          Bid        Ask           Change        Low       High
   ----------------------------------------------------------------------
   Gold         1619.80     1620.80     -8.90  -0.55%    1616.60  1632.70
   Silver         28.46       28.56     -0.28  -0.97%      28.24    28.95
   Platinum     1479.00     1489.00      0.00   0.00%    1476.00  1500.00
   Palladium     627.00      632.00      0.00   0.00%     622.00   639.00
   ----------------------------------------------------------------------
   Last Update on Jun 19, 2012 at 12:50.59
   ----------------------------------------------------------------------


                Asia / Europe Spot Price
                MARKET IS OPEN
            Will close in 4 hours 25 minutes
   ----------------------------------------------------------------------
   Metals                      Bid          Ask      Change from NY close
   ----------------------------------------------------------------------
   Gold                      1619.80      1620.80     -8.90   -0.55%
   Silver                      28.46        28.56     -0.28   -0.97%
   Platinum                  1479.00      1489.00     +0.00   +0.00%
   Palladium                  627.00       632.00     +0.00   +0.00%
   ----------------------------------------------------------------------
   Last Update on Jun 19, 2012 at 12:50.59
   ----------------------------------------------------------------------


<b>   File created on Tue Jun 19 12:51:04 2012</b>


        <style type="text/css"><!--
 #main_container_footer {width:100%;text-align: center;}
    #main_container_footer #footer_container {width:auto; margin:25px auto 25px auto;}
    #main_container_footer #footer_container ul {margin:0; padding:0;}
    #main_container_footer #footer_container ul li {float:left; display:inline; list-style:none; padding:0 8px; font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px; color:#000; border-right:1px #000 solid;}
    #main_container_footer #footer_container ul li a {font-family:Verdana, Arial, Helvetica, sans-serif; font-size:12px; color:#000; text-decoration:underline; font-weight:normal;}
    #main_container_footer #footer_container ul li a:hover {color:#ac1a2f; text-decoration:none; font-weight:normal;}
    #main_container_footer #footer_container ul li.no_border {border:0px;}
--></style>
  <table border="0" cellspacing="0" cellpadding="0"><tr><td>
 <div id="main_container_footer">
        <div id="footer_container">
            <ul>
                <li class="no_border"><script type="text/javascript">
copyright=new Date();
update=copyright.getFullYear();
document.write("&copy; "+ update + " Kitco Metals Inc.");
</script></li>
                <li><a href="https://corp.kitco.com/index.html">About Us</a></li>
                <li><a href="http://www.kitco.com/TermsofUse/" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Website Terms of Use</a></li>
                <li><a href="https://online.kitco.com/help/privacy_policy.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Privacy Policy</a></li>
                <li><a href="http://www.kitco.com/ads/">Advertise With Us</a></li>
                <li><a href="https://corp.kitco.com/en/corporate_culture.html">Careers</a></li>
                <li><a href="https://corp.kitco.com/en/contact.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Contact Us</a></li>
                <li class="no_border"><a href="https://corp.kitco.com/en/feedback.html" target="_top" onclick="Window_open(this.href,'KITCO','top=120,left=250,width=500,height=350'); return false">Feedback</a></li>
            </ul>
        </div>
    </div> 

    </td></tr></table><br /><br />
<script language="JavaScript" type="text/javascript">
<!--
function Window_open (Address) {
  NewWindow = window.open(Address, "Popup", "width=695,height=600,left=100,top=200,resizable=yes,scrollbars=yes");
  NewWindow.focus();
}
// -->
</script>
 <!-- img src="http://www.kitco.com/scripts/counter/counter.pl?txtonlyE.txt" width="1" height="1" -->
<!-- Google-Analytics Code-->
<script type="text/javascript">
  var _gaq = _gaq || [];
  _gaq.push(['_setAccount', 'UA-4074364-3']);
  _gaq.push(['_trackPageview']);

  (function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
  })();
</script>
</body>
</html>

More specifically, I am looking to capture the following data:

--------------------------------------------------------------------------------
London Fix          GOLD          SILVER       PLATINUM           PALLADIUM
               AM       PM                  AM       PM         AM       PM
--------------------------------------------------------------------------------
Jun 19,2012   1628.50   NA        28.8100   1486.00   1486.00   629.00   634.00 
Jun 18,2012   1623.50   1615.50   28.4300   1486.00   1484.00   626.00   628.00 
--------------------------------------------------------------------------------

Does anybody have any suggestions how I can do this using PHP?



1 Answer



Quick and dirty regex method:

$data = file_get_contents('http://www.kitco.com/texten/texten.html');
preg_match_all('/([A-Z]{3,5}\s+[0-9]{1,2},[0-9]{4}\s+([0-9.NA]{2,10}\s+){1,7})/si',$data,$result);

$records = array();
foreach($result[1] as $date) {
    $temp = preg_split('/\s+/',$date);
    $index = array_shift($temp);
    $index.= array_shift($temp);
    $records[$index] = implode(',',$temp);
}
print_R($records);

Note, you'd probably want to add some validation, etc.


Source: http://stackoverflow.com/questions/11103001/web-data-extraction-scraping-data-from-kitco-inc-text-only-market-page

Monday, 8 September 2014

Scraping webdata from a website that loads data in a streaming fashion

I'm trying to scrape some data off of the FEC.gov website using python for a project of mine. Normally I use python

mechanize and beautifulsoup to do the scraping.

I've been able to figure out most of the issues but can't seem to get around a problem. It seems like the data is

streamed into the table and mechanize.Browser() just stops listening.

So here's the issue: If you visit http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A ... you get the first 500

contributors whose last name starts with A and have given money to candidate P80003338 ... however, if you use

browser.open() at that url all you get is the first ~5 rows.

I'm guessing its because mechanize isn't letting the page fully load before the .read() is executed. I tried putting a

time.sleep(10) between the .open() and .read() but that didn't make much difference.

And I checked, there's no javascript or AJAX in the website (or at least none are visible when you use the 'view-

source'). SO I don't think its a javascript issue.

Any thoughts or suggestions? I could use selenium or something similar but that's something that I'm trying to avoid.

-Will

2 Answers

Why not use an html parser like lxml with xpath expressions.

I tried

>>> import lxml.html as lh
>>> data = lh.parse('http://query.nictusa.com/cgi-bin/can_ind/2011_P80003338/1/A')
>>> name = data.xpath('/html/body/table[2]/tr[5]/td[1]/a/text()')
>>> name
[' AABY, TRYGVE']
>>> name = data.xpath('//table[2]/*/td[1]/a/text()')
>>> len(name)
500
>>> name[499]
' AHMED, ASHFAQ'
>>>



Similarly, you can create xpath expression of your choice to work with.


Source: http://stackoverflow.com/questions/9435512/scraping-webdata-from-a-website-that-loads-data-in-a-streaming-

fashion

How can I circumvent page view limits when scraping web data using Python?

I am using Python to scrape US postal code population data from http:/www.city-data.com, through this directory: http://www.city-data.com/zipDir.html. The specific pages I am trying to scrape are individual postal code pages with URLs like this: http://www.city-data.com/zips/01001.html. All of the individual zip code pages I need to access have this same URL Format, so my script simply does the following for postal_code in range:

    Creates URL given postal code
    Tries to get response from URL
    If (2), Check the HTTP of that URL
    If HTTP is 200, retrieves the HTML and scrapes the data into a list
    If HTTP is not 200, pass and count error (not a valid postal code/URL)
    If no response from URL because of error, pass that postal code and count error
    At end of script, print counter variables and timestamp

The problem is that I run the script and it works fine for ~500 postal codes, then suddenly stops working and returns repeated timeout errors. My suspicion is that the site's server is limiting the page views coming from my IP address, preventing me from completing the amount of scraping that I need to do (all 100,000 potential postal codes).

My question is as follows: Is there a way to confuse the site's server, for example using a proxy of some kind, so that it will not limit my page views and I can scrape all of the data I need?

Thanks for the help! Here is the code:

##POSTAL CODE POPULATION SCRAPER##

import requests

import re

import datetime

def zip_population_scrape():

    """
    This script will scrape population data for postal codes in range
    from city-data.com.
    """
    postal_code_data = [['zip','population']] #list for storing scraped data

    #Counters for keeping track:
    total_scraped = 0
    total_invalid = 0
    errors = 0


    for postal_code in range(1001,5000):

        #This if statement is necessary because the postal code can't start
        #with 0 in order for the for statement to interate successfully
        if postal_code <10000:
            postal_code_string = str(0)+str(postal_code)
        else:
            postal_code_string = str(postal_code)

        #all postal code URLs have the same format on this site
        url = 'http://www.city-data.com/zips/' + postal_code_string + '.html'

        #try to get current URL
        try:
            response = requests.get(url, timeout = 5)
            http = response.status_code

            #print current for logging purposes
            print url +" - HTTP:  " + str(http)

            #if valid webpage:
            if http == 200:

                #save html as text
                html = response.text

                #extra print statement for status updates
                print "HTML ready"

                #try to find two substrings in HTML text
                #add the substring in between them to list w/ postal code
                try:           

                    found = re.search('population in 2011:</b> (.*)<br>', html).group(1)

                    #add to # scraped counter
                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])

                    #print statement for logging
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."
                #if substrings not found, try searching for others
                #and doing the same as above   
                except AttributeError:
                    found = re.search('population in 2010:</b> (.*)<br>', html).group(1)

                    total_scraped +=1

                    postal_code_data.append([postal_code_string,found])
                    print postal_code_string + ": " + str(found) + ". Data scrape successful. " + str(total_scraped) + " total zips scraped."

            #if http =404, zip is not valid. Add to counter and print log        
            elif http == 404:
                total_invalid +=1

                print postal_code_string + ": Not a valid zip code. " + str(total_invalid) + " total invalid zips."

            #other http codes: add to error counter and print log
            else:
                errors +=1

                print postal_code_string + ": HTTP Code Error. " + str(errors) + " total errors."

        #if get url fails by connnection error, add to error count & pass
        except requests.exceptions.ConnectionError:
            errors +=1
            print postal_code_string + ": Connection Error. " + str(errors) + " total errors."
            pass

        #if get url fails by timeout error, add to error count & pass
        except requests.exceptions.Timeout:
            errors +=1
            print postal_code_string + ": Timeout Error. " + str(errors) + " total errors."
            pass


    #print final log/counter data, along with timestamp finished
    now= datetime.datetime.now()
    print now.strftime("%Y-%m-%d %H:%M")
    print str(total_scraped) + " total zips scraped."
    print str(total_invalid) + " total unavailable zips."
    print str(errors) + " total errors."



Source: http://stackoverflow.com/questions/25452798/how-can-i-circumvent-page-view-limits-when-scraping-web-data-using-python

Sunday, 7 September 2014

Web data scraping (online news comments) with Scrapy (Python)

Since you seem like the try-first ask-question later type (that's a very good thing), I won't give you an answer, but a

(very detailed) guide on how to find the answer.

The thing is, unless you are a yahoo developer, you probably don't have access to the source code you're trying to

scrape. That is to say, you don't know exactly how the site is built and how your requests to it as a user are being

processed on the server-side. You can, however, investigate the client-side and try to emulate it. I like using Chrome

Developer Tools for this, but you can use others such as FF firebug.

So first off we need to figure out what's going on. So the way it works, is you click on the 'show comments' it loads

the first ten, then you need to keep clicking for the next ten comments each time. Notice, however, that all this

clicking isn't taking you to a different link, but lively fetches the comments, which is a very neat UI but for our

case requires a bit more work. I can tell two things right away:

    They're using javascript to load the comments (because I'm staying on the same page).
    They load them dynamically with AJAX calls each time you click (meaning instead of loading the comments with the

page and just showing them to you, with each click it does another request to the database).

Now let's right-click and inspect element on that button. It's actually just a simple span with text:

<span>View Comments (2077)</span>

By looking at that we still don't know how that's generated or what it does when clicked. Fine. Now, keeping the

devtools window open, let's click on it. This opened up the first ten. But in fact, a request was being made for us to

fetch them. A request that chrome devtools recorded. We look in the network tab of the devtools and see a lot of

confusing data. Wait, here's one that makes sense:

http://news.yahoo.com/_xhr/contentcomments/get_comments/?content_id=42f7f6e0-7bae-33d3-aa1d-

3dfc7fb5cdfc&_device=full&count=10&sortBy=highestRated&isNext=true&offset=20&pageNumber=2&_media.modules.content_commen

ts.switches._enable_view_others=1&_media.modules.content_comments.switches._enable_mutecommenter=1&enable_collapsed_com

ment=1

See? _xhr and then get_comments. That makes a lot of sense. Going to that link in the browser gave me a JSON object

(looks like a python dictionary) containing all the ten comments which that request fetched. Now that's the request you

need to emulate, because that's the one that gives you what you want. First let's translate this to some normal reqest

that a human can read:

go to this url: http://news.yahoo.com/_xhr/contentcomments/get_comments/
include these parameters: {'_device': 'full',
          '_media.modules.content_comments.switches._enable_mutecommenter': '1',
          '_media.modules.content_comments.switches._enable_view_others': '1',
          'content_id': '42f7f6e0-7bae-33d3-aa1d-3dfc7fb5cdfc',
          'count': '10',
          'enable_collapsed_comment': '1',
          'isNext': 'true',
          'offset': '20',
          'pageNumber': '2',
          'sortBy': 'highestRated'}

Now it's just a matter of trial-and-error. However, a few things to note here:

    Obviously the count is what decides how many comments you're getting. I tried changing it to 100 to see what

happens and got a bad request. And it was nice enough to tell me why - "Offset should be multiple of total rows". So

now we understand how to use offset

    The content_id is probably something that identifies the article you are reading. Meaning you need to fetch that

from the original page somehow. Try digging around a little, you'll find it.

    Also, you obviously don't want to fetch 10 comments at a time, so it's probably a good idea to find a way to fetch

the number of total comments somehow (either find out how the page gets it, or just fetch it from within the article

itself)

    Using the devtools you have access to all client-side scripts. So by digging you can find that that link to

/get_comments/ is kept within a javascript object named YUI. You can then try to understand how it is making the

request, and try to emulate that (though you can probably figure it out yourself)

    You might need to overcome some security measures. For example, you might need a session-key from the original

article before you can access the comments. This is used to prevent direct access to some parts of the sites. I won't

trouble you with the details, because it doesn't seem like a problem in this case, but you do need to be aware of it in

case it shows up.

    Finally, you'll have to parse the JSON object (python has excellent built-in tools for that) and then parse the

html comments you are getting (for which you might want to check out BeautifulSoup).

As you can see, this will require some work, but despite all I've written, it's not an extremely complicated task

either.

So don't panic.

It's just a matter of digging and digging until you find gold (also, having some basic WEB knowledge doesn't hurt).

Then, if you face a roadblock and really can't go any further, come back here to SO, and ask again. Someone will help

you.


Source: http://stackoverflow.com/questions/20218855/web-data-scraping-online-news-comments-with-scrapy-python

Saturday, 6 September 2014

A good web data extraction/screen scraper program?

I need to capture product data from a site on a regular basis and wondered if any one knows of a good software program? I've trialed Mozenda but its a monthly subscription and pricey in the long term. Obviously something thats free would be best but I don't mind paying either. Just need a decent program thats reliable and doesn't require much programming knowledge.

You can try ScraperWiki.com if you know python.

I've experimented with Screen-Scraper and found it easy to use. The application comes in multiple versions: basic (which is free), professional, and enterprise. Also, multiple platforms are supported.

Hire a programmer to do it so that there is only a one off cost. I often see similar projects on freelancing websites like Elance and oDesk.

I really like iMacros. You can give it a test drive to see if it meets your needs with the totally free Firefox extension (there's also IE versions), but there are also more full featured application and "server" versions that have more features and ability to do thing in an unattended manner.

Here are some other alternatives to consider:

    License the data from the provider. Call em up and ask 'em.

    Use Amazon Mechanical Turk to get humans to copy and paste and format it for ya. They are cheap.

    For automation, it depends on how complicated the HTML is and how often it changes. You could use Excel's Web Data Import if it's really simple.


You can use irobot from IRobotSoft, which is totally free, and provides more functionalityies than other paid software. Watch demos here http://irobotsoft.com/help/ for how simple it is.

Questions on their forum were answered very quickly.


Source: http://stackoverflow.com/questions/2334164/a-good-web-data-extraction-screen-scraper-program

Thursday, 4 September 2014

How to login to website and extract data using PHP [closed]

I have installed the tiny tiny rss on to my computer (Windows) and also have Xampp installed (localhost).

I want to be able to use PHP to extract data from the Tiny tiny RSS webpage.

I have tried this it which just opens the front page:

<?php
$homepage = file_get_contents('my install tiny tiny rss url');
echo $homepage;
?>

But how do I login and extract the data.

You can use cURL to send post data and headers. To login you need to replicate the exact data exchange between the client and the server.


SOurce: http://stackoverflow.com/questions/20611918/how-to-login-to-website-and-extract-data-using-php

Is it ok to scrape data from Google results?


I'd like to fetch results from Google using curl to detect potential duplicate content. Is there a high risk of being banned by Google?

Google will eventually block your IP when you exceed a certain amount of requests.



Google disallows automated access in their TOS, so if you accept their terms you would break them.

That said, I know of no lawsuit from Google against a scraper. Even Microsoft scraped Google, they powered their search engine Bing with it. They got caught in 2011 red handed :)

There are two options to scrape Google results:

1) Use their API

    You can issue around 40 requests per hour You are limited to what they give you, it's not really useful if you want to track ranking positions or what a real user would see. That's something you are not allowed to gather.

    If you want a higher amount of API requests you need to pay.
    60 requests per hour cost 2000 USD per year, more queries require a custom deal.

2) Scrape the normal result pages

    Here comes the tricky part. It is possible to scrape the normal result pages. Google does not allow it.
    If you scrape at a rate higher than 15 keyword requests per hour you risk detection, higher than 20/h will get you blocked from my experience.
    By using multiple IPs you can up the rate, so with 100 IP addresses you can scrape up to 2000 requests per hour. (50k a day)
    There is an open source search engine scraper written in PHP at http://scraping.compunect.com It allows to reliable scrape Google, parses the results properly and manages IP addresses, delays, etc. So if you can use PHP it's a nice kickstart, otherwise the code will still be useful to learn how it is done.


Source: http://stackoverflow.com/questions/22657548/is-it-ok-to-scrape-data-from-google-results

Data Scraping from PDF and Excel

I am doing a little data scraping, There are 3 types of file from which i am scraping data.

1- HTML
2- PDF
3- Excel(xls)

For HTML i am comfortable, i am using HTML Agility for that.

For PDF and excel i need suggestions from anyone.



Concerning Excel. If you are in a MS environment you can either do Office Automation or use OLEDB. In a Java

environment look at Apache POI.

EDIT: Concerning PDF in Java try Apache PDFBox . Can also work in .NET using IKVM

I can recommend Cogniview's PDF2XL, a reasonably inexpensive commercial product, to extract data from tables in PDF

files into Excel. We have used it with great success.

HTML Agility is a library. Its good to use. But then, why do you need separate tools for different data extraction

purposes? Use Automation Anywhere to extract data from any source. As far as I know, it would work for all the three

sources you have specified. Google it.

Source: http://stackoverflow.com/questions/3147803/data-scraping-from-pdf-and-excel

Wednesday, 3 September 2014

Excel VBA Data Mining Real-Time Data from a Web Page that Refreshes Data

I want to capture real-time data that updates into a table on a webpage; I prefer capturing it into excel using VBA, but I will write it in .NET C# or VB if I that is easier.

the data updates about 1 or 2 seconds, and I want to just grab the latest data quotes and log it into my spreadsheet; the table names are the same, only the data refreshes, and it does so automatically on the web page.

I've done a lot of Excel VBA and I know how to download a URL to a file--this is NOT what I want; I want to gain access to my webpage that is active and grab the data updates after I've logged into my site and selected a webpage that I like.

Is there a simple way to access this data on the webpage from Excel or .Net? Because it refreshes no more than once every 1 or 2 seconds, it is easy to just keep checking it for updates, and I can compare the latest data to see if it actually refreshed.


In Excel 2003, use Data/Import External Data/New Web Query
Browse to your page and select the table you want to import.
After that you can either do a manual Refresh, or use a timer procedure to do something like:

Source: http://stackoverflow.com/questions/9855794/excel-vba-data-mining-real-time-data-from-a-web-page-that-refreshes-data

Tuesday, 2 September 2014

Need to pull data from a website…web query? macro?


How to extract data from web 2.0 graphs using a scraper


I have recently come across a web page containing a graph object that displays the (x, y) values on the object as the mouse is rolled across it. Is there any way to automate the extraction of this data?

How is the graph data loaded? If embedded in the page source then you can extract it with xpath or regex. Else use Firebug to see how it is loaded.



You will need a solution that works inside the web browser, so the AJAX/Javascript is properly rendered.

I have used iMacros with good success for web scraping in the past. There are free/open-source and "PRO" paid editions (comparison table here).

Another option is always to custom code something with the Microsoft webbrowser control.


Source: http://stackoverflow.com/questions/3980774/how-to-extract-data-from-web-2-0-graphs-using-a-scraper

Monday, 1 September 2014

Legality of Web Scraping vs Normal Use


I know the topic of web scraping has been discussed before (example), and I understand it's a bit of a grey area depending on a lot of factors (e.g. website's terms of use).

What I'd like to ask is: how is web scraping any different from (a) how we access the webpage via a web browser, and (b) how web crawlers (e.g. Google) download and index webpages?

Without knowing the legal background, I can't help but think that they're all just HTTP requests. If web scraping is illegal, then so should crawling and indexing (for instance be illegal).

Of course if your program is hitting the server so hard that it causes a denial of service, it's a different story altogether... my point is simply accessing and using data that is already open to the public.



I know this is a dead thread, but it would be nice to place some legal implications here due to its ranking in my Google Search. I cannot help but figure I am not the only one who searches like I do.

Legally, in the US, there are a few factors that seem to be important.

    Are you doing anything that is akin to hacking or gaining unauthorized access via the Computer Fraud and Abuse Act. Exploiting vulnerabilities and passing SQL in the URL to open a database no matter how bad the idiot programming like that was is illegal with a 15 year sentence (see the cases where an individual exploited security vulnerabilities in Verizon). Also, add a time out even if you round robin or use proxies. DDoS attacks are attacks. 1000 requests per second can shut down a lot of servers providing public information. The result here is up to 15 years in jail.

    Copyright Law: As mentioned, pure replication of data is illegal. Even 4% replication has been deemed a breach. With the recent gutting of the DMCA, a person is even more vulnerable to civil and criminal penalties.

    Trespass and Chattels: The following from wikipedia says it all.

    U.S. courts have acknowledged that users of "scrapers" or "robots" may be held liable for committing trespass to chattels,[5][6] which involves a computer system itself being considered personal property upon which the user of a scraper is trespassing. The best known of these cases, eBay v. Bidder's Edge, resulted in an injunction ordering Bidder's Edge to stop accessing, collecting, and indexing auctions from the eBay web site.

    Paywalls and Product: When going behind paywalls and breaching contract by clicking an agreement not to do something and then doing it, you add fuel to the protection of negligence v. willingness [an issue for damages and penalties not guilt] in civil and any criminal trials. (sorry originally wanted to say ignorance but it really isn't a defense)

    International: EU law and other law is way more lax. Corporations with big budgets dominate our legal landscape. They control the system in a very real way with their $$$.

Basically, get public information and information that is available without going behind a pay wall. Think like a user of the internet and combine a bunch of sources into a unique product. Don't just 'steal' an entire site (it isn't really stealing if it is a government site that offers public data especially for download but is if you download all or even more than a couple of the listings on ebay). Read the terms and conditions to know who actually owns the content.

Here are a few examples. Trulia owns its information but you could use it to go to an agents website and collect a legal amount of information. The legal amount is determinable. However, a public MLS listing lookup site with no agreement or terms and offering data to the public is fair game. The MLS numbers lists, however, are normally not fair game.

If a researcher can get to data, so can you. If a researcher needs permission, so do you. A computer is like having a million corporate researchers at your disposal.

AS for company policy, it is usually used internally to shield from liability and serves as a warning but is not entirely enforceable. The legal parts letting you know about copyrights and such are and usually are supposed to be known by everyone. Complete ignorance is not a legal protection. It does provide a ground set of rules. Be nice, or get banned is that message as far as I know.

My personal strategy is to start with public data and embellish it within legal means.


Source: http://stackoverflow.com/questions/14735791/legality-of-web-scraping-vs-normal-use

Anyone knows an online tool that can scrape a page and create a REST API for the scraped data?


I'm looking for a SaaS solution that is able to login to a platform, scrape data (reports) and then allow accessing the data through an API. I have some reporting platforms that provide web reporting and email reporting but with no API. Online reporting doesn't help and email reporting, although can be automated and scraped, isn't so reliable.

If you are willing to do the scraping through your own connection, have a look at Import IO. They have a desktop application that you use to teach the system how to scrape a page, and then you run the crawler from that application - and you can run it for as long as you like, as far as I can tell.

You may then upload your data to the Import cloud, from where it is available via an API on the import.io servers. Useful data can be made public to donate it "to the commons" if you wish.


I did some more digging, found iMacros as a possible solution. Its Windows based, which is a drawback in my case, but it does allow automation of the scraping and afterwards interaction via common web scripting languages like PHP and ASP.net.


If you are familiar with jQuery, I think you can use node.js and Cheerio module, then you can create a simple application to do auto scraping. Actually I have already built a site to do on line web scraping based on the above mentioned tech, the site is www.datafiddle.net, you can take a look at it.


Source: http://stackoverflow.com/questions/19646028/anyone-knows-an-online-tool-that-can-scrape-a-page-and-create-a-rest-api-for-the

Wednesday, 27 August 2014

Extract data from Web Scraping C#


I am MVC ASP.NET developer.

I have received the contents from any url, i.e. http, https etc. using WebRequest class.

I have received all the content of that particular url. (for now I took http://google.com)

My next step is to extract buttons, header, footer, colors, text etc.

Here is my code for now:

public ActionResult GetContent(UrlModel model) //model having a string URL
which is entered in a text box and method hits using submit button.
{
    //WebRequest request = WebRequest.Create(model.URL);

    WebRequest request = WebRequest.Create(model.URL);

    request.Credentials = CredentialCache.DefaultCredentials;

    WebResponse response = request.GetResponse();

    Stream dataStream = response.GetResponseStream();

    StreamReader reader = new StreamReader(dataStream);

    string responseFromServer = reader.ReadToEnd();
    ViewBag.Response = responseFromServer;

    reader.Close();
    response.Close();
    return View();
}

Can someone help me with writing the code ?

Also do suggest me with some techniques of data extraction in C#.



Source: http://stackoverflow.com/questions/21901162/extract-data-from-web-scraping-c-sharp

Scrapy, scraping price data from StubHub

I've been having a difficult time with this one.

I want to scrape all the prices listed for this Bruno Mars concert at the Hollywood Bowl so I can get the average price.

http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/

I've located the prices in the HTML and the xpath is pretty straightforward but I cannot get any values to return.

I think it has something to do with the content being generated via javascript or ajax but I can't figure out how to send the correct request to get the code to work.

Here's what I have:

from scrapy.spider import BaseSpider
from scrapy.selector import Selector

from deeptix.items import DeeptixItem

class TicketSpider(BaseSpider):
    name = "deeptix"
    allowed_domains = ["stubhub.com"]
    start_urls = ["http://www.stubhub.com/bruno-mars-tickets/bruno-mars-hollywood-hollywood-bowl-31-5-2014-4449604/"]

def parse(self, response):
    sel = Selector(response)
    sites = sel.xpath('//div[contains(@class, "q_cont")]')
    items = []
    for site in sites:
        item = DeeptixItem()
        item['price'] = site.xpath('span[contains(@class, "q")]/text()').extract()
        items.append(item)
    return items

Any help would be greatly appreciated I've been struggling with this one for quite some time now. Thank you in advance!


Source: http://stackoverflow.com/questions/22770917/scrapy-scraping-price-data-from-stubhub

Tuesday, 26 August 2014

How do you scrape AJAX pages?

Overview:

All screen scraping first requires manual review of the page you want to extract resources from. When dealing with AJAX you usually just need to analyze a bit more than just simply the HTML.

When dealing with AJAX this just means that the value you want is not in the initial HTML document that you requested, but that javascript will be exectued which asks the server for the extra information you want.

You can therefore usually simply analyze the javascript and see which request the javascript makes and just call this URL instead from the start.

Example:

Take this as an example, assume the page you want to scrape from has the following script:

<script type="text/javascript">
function ajaxFunction()
{
var xmlHttp;
try
  {
  // Firefox, Opera 8.0+, Safari
  xmlHttp=new XMLHttpRequest();
  }
catch (e)
  {
  // Internet Explorer
  try
    {
    xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
    }
  catch (e)
    {
    try
      {
      xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
      }
    catch (e)
      {
      alert("Your browser does not support AJAX!");
      return false;
      }
    }
  }
  xmlHttp.onreadystatechange=function()
    {
    if(xmlHttp.readyState==4)
      {
      document.myForm.time.value=xmlHttp.responseText;
      }
    }
  xmlHttp.open("GET","time.asp",true);
  xmlHttp.send(null);
  }
</script>

Then all you need to do is instead do an HTTP request to time.asp of the same server instead. Example from w3schools.


Sporce: http://stackoverflow.com/questions/260540/how-do-you-scrape-ajax-pages

using Perl to scrape a website


I am interested in writing a perl script that goes to the following link and extracts the number 1975: https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3ACalifornia%20%2Bevent_place_level_2%3A%22San%20Diego%22%20%2Bbirth_year%3A1923-1923~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219

That website is the amount of white men born in the year 1923 who live in San Diego County, California in 1940. I am trying to do this in a loop structure to generalize over multiple counties and birth years.

In the file, locations.txt, I put the list of counties, such as San Diego County.

The current code runs, but instead of the # 1975, it displays unknown. The number 1975 should be in $val\n.

I would very much appreciate any help!

#!/usr/bin/perl

use strict;

use LWP::Simple;

open(L, "locations26.txt");

my $url = 'https://familysearch.org/search/collection/results#count=20&query=%2Bevent_place_level_1%3A%22California%22%20%2Bevent_place_level_2%3A%22%LOCATION%%22%20%2Bbirth_year%3A%YEAR%-%YEAR%~%20%2Bgender%3AM%20%2Brace%3AWhite&collection_id=2000219';

open(O, ">out26.txt");
 my $oldh = select(O);
 $| = 1;
 select($oldh);
 while (my $location = <L>) {
     chomp($location);
     $location =~ s/ /+/g;
      foreach my $year (1923..1923) {
                 my $u = $url;
                 $u =~ s/%LOCATION%/$location/;
                 $u =~ s/%YEAR%/$year/;
                 #print "$u\n";
                 my $content = get($u);
                 my $val = 'unknown';
                 if ($content =~ / of .strong.([0-9,]+)..strong. /) {
                         $val = $1;
                 }
                 $val =~ s/,//g;
                 $location =~ s/\+/ /g;
                 print "'$location',$year,$val\n";
                 print O "'$location',$year,$val\n";
         }
     }

Update: API is not a viable solution. I have been in contact with the site developer. The API does not apply to that part of the webpage. Hence, any solution pertaining to JSON will not be applicbale.



Source: http://stackoverflow.com/questions/14654288/using-perl-to-scrape-a-website

Monday, 25 August 2014

Data Scraping using php

Here is my code

    $ip=$_SERVER['REMOTE_ADDR'];

    $url=file_get_contents("http://whatismyipaddress.com/ip/$ip");

    preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);

    $isp=$output[1][2];

    $city=$output[9][2];

    $state=$output[8][2];

    $zipcode=$output[12][2];

    $country=$output[7][2];

    ?>
    <body>
    <table align="center">
    <tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
    <tr><td>City :</td><td><?php echo $city;?></td></tr>
    <tr><td>State :</td><td><?php echo $state;?></td></tr>
    <tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
    <tr><td>Country :</td><td><?php echo $country;?></td></tr>
    </table>
    </body>

How do I find out the ISP provider of a person viewing a PHP page?

Is it possible to use PHP to track or reveal it?

Error: http://i.imgur.com/LGWI8.png

Curl Scrapping

<?php
$curl_handle=curl_init();
curl_setopt( $curl_handle, CURLOPT_FOLLOWLOCATION, true );
$url='http://www.whatismyipaddress.com/ip/132.123.23.23';
curl_setopt($curl_handle, CURLOPT_URL,$url);
curl_setopt($curl_handle, CURLOPT_HTTPHEADER, Array("User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.15) Gecko/20080623 Firefox/2.0.0.15") );
curl_setopt($curl_handle, CURLOPT_CONNECTTIMEOUT, 2);
curl_setopt($curl_handle, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($curl_handle, CURLOPT_USERAGENT, 'Your application name');
$query = curl_exec($curl_handle);

curl_close($curl_handle);
preg_match_all('/<th>(.*?)<\/th><td>(.*?)<\/td>/s',$url,$output,PREG_SET_ORDER);
echo $query;
$isp=$output[1][2];

$city=$output[9][2];

$state=$output[8][2];

$zipcode=$output[12][2];

$country=$output[7][2];
?>
<body>
<table align="center">
<tr><td>ISP :</td><td><?php echo $isp;?></td></tr>
<tr><td>City :</td><td><?php echo $city;?></td></tr>
<tr><td>State :</td><td><?php echo $state;?></td></tr>
<tr><td>Zipcode :</td><td><?php echo $zipcode;?></td></tr>
<tr><td>Country :</td><td><?php echo $country;?></td></tr>
</table>
</body>

Error: http://i.imgur.com/FJIq6.png

What's is wrong with my code here? Any alternative code , that i can use here.

I am not able to scrape that data as described here. http://i.imgur.com/FJIq6.png

P.S. Please post full code. It would be easier for me to understand.



Source: http://stackoverflow.com/questions/10461088/data-scraping-using-php

PDF scraping using R

I have been using the XML package successfully for extracting HTML tables but want to extend to PDF's. From previous questions it does not appear that there is a simple R solution but wondered if there had been any recent developments

Failing that, is there some way in Python (in which I am a complete Novice) to obtain and manipulate pdfs so that I could finish the job off with the R XML package

Extracting text from PDFs is hard, and nearly always requires lots of care.

I'd start with the command line tools such as pdftotext and see what they spit out. The problem is that PDFs can store the text in any order, can use awkward font encodings, and can do things like use ligature characters (the joined up 'ff' and 'ij' that you see in proper typesetting) to throw you.

pdftotext is installable on any Linux system



Source: http://stackoverflow.com/questions/7918718/pdf-scraping-using-r

Sunday, 24 August 2014

Php Scraping data from a website


I am very new to programming and need a little help with getting data from a website and passing it into my PHP script.

The website is http://www.birthdatabase.com/.

I would like to plug in a name (First and Last) and retrieve the result. I know you can query the site by passing the name in the URL, but I am having problems scraping the results.

http://www.birthdatabase.com/cgi-bin/query.pl?textfield=FIRST&textfield2=LAST&age=&affid=

I am using the file_get_contents($URL) function to get the page but need help after that. Specifically, I would like to scrape only the results from a certain state if there are multiple results for that name.



You need the awesome simple_html_dom class.

With this class you can query the webpage's DOM in a similar way to jQuery.

First include the class in your page, then get the page content with this snippet:

$html = file_get_html('http://www.birthdatabase.com/cgi-bin/query.pl?textfield=' . $first . '&textfield2=' . $last . '&age=&affid=');

Then you can use CSS selections to scrape your data (something like this):

$n = 0;
foreach($html->find('table tbody tr td div font b table tbody') as $element) {
    @$row[$n]['tr']  = $element->find('tr')->text;
    $n++;
}

// output your data
print_r($row);



Source: http://stackoverflow.com/questions/15601584/php-scraping-data-from-a-website

Obtaining reddit data

I am interested in obtaining data from different reddit subreddits. Does anyone know

if there is a reddit/other api similar like twitter does to crawl all the pages?


Yes, reddit has an API that can be used for a variety of purposes such as data

collection, automatic commenting bots, or even to assist in subreddit moderation.

There are a few places to discover information on reddit's API:

    github reddit wiki -- provides the overview and rules for using reddit's API

(follow the rules)
    automatically generated API docs -- provides information on the requests needed to

access most of the API endpoints
    /r/redditdev -- the reddit community dedicated to answering questions both about

reddit's source code and about reddit's API

If there is a particular programming language you are already familiar with, you

should check out the existing set of API wrappers for various languages. Despite my

bias (I am the package maintainer) I am quite certain PRAW, for python, has support

for the largest number of reddit API features.



Source: http://stackoverflow.com/questions/14322834/obtaining-reddit-data

Saturday, 23 August 2014

Scraping data in dynamic sites

I'm trying to scrape data from our local government. What I want is address from kids adoption offices. Here, in Brazil, all adoptions go through the government. So I have the URL of one office, there are 2 or 3 thousands more. But if I can manage to get one, the others will be easy. I made many attempts, bellow I show three.

The problem could be related to a Javascript (Ajax maybe) that refresh the page.

Note: I am not a PHP developer.

First attempt

echo '<html><head></head><body>';
echo '<h1>Scraper PHP GET 1</h1>';

echo ini_get("allow_url_fopen");
echo ini_get("allow_url_fopen");

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$html = file_get_contents($url);
var_dump($html);

echo '</body></html>';

// Output
// 11
// Warning:
file_get_contents(http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?
transacao=CONSULTA&vara=2673) [function.file-get-contents]: failed to open stream: HTTP
request failed! HTTP/1.1 404 Not Found in /home/rsl/www/sc01_get.php on line 14
// bool(false)

Second attempt

echo '<html><head></head><body>';
echo '<h1>Scraper PHP CURL 3</h1>';

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$curl = curl_init($url);
@curl_setopt($curl, CURLOPT_POSTFIELDS, "foo");
@curl_setopt($curl, CURLOPT_FOLLOWLOCATION, true);
@curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");;

$html=@curl_exec($curl);

if (!$html) {
    echo "<br />cURL error number:" .curl_errno($curl);
    echo "<br />cURL error:" . curl_error($curl);
    exit;
}
else{
   echo '<br>begin HTML[';
    echo  $html;
   echo '<br>]end html ';
}
echo '</body></html>';

// Output
// 1

third attempt

function curl($url){
    $ch = curl_init();
    curl_setopt($ch, CURLOPT_URL, $url);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
    curl_setopt($ch, CURLOPT_USERAGENT, 'Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.6 (KHTML, like Gecko) Chrome/16.0.897.0 Safari/535.6');
    curl_setopt($ch, CURLOPT_HEADER, true);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
    curl_setopt($ch, CURLOPT_COOKIEFILE, "cookie.txt");
    curl_setopt($ch, CURLOPT_COOKIEJAR, "cookie.txt");
    curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 30);
    curl_setopt($ch, CURLOPT_REFERER, "http://www.windowsphone.com");

    $data = curl_exec($ch);
    curl_close($ch);
    return $data;
}

echo '<html><head></head><body>';
echo '<h1>Scraper PHP CURL 5</h1>';

// I used this url for test
//$url = 'http://www.portaldaadocao.com.br';

//This is the URL that I really want
$url = 'http://www.cnj.jus.br/cna/Controle/ConsultaPublicaBuscaControle.php?transacao=CONSULTA&vara=2673';

$curl = curl_init($url);
@curl_setopt($curl, CURLOPT_POSTFIELDS, "foo");
@curl_setopt($curl, CURLOPT_FOLLOWLOCATION, true);
@curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");;

$html=@curl($curl);


if (!$html) {
    echo "<br />cURL error number:" .curl_errno($curl);
    echo "<br />cURL error:" . curl_error($curl);
    exit;
}
else{
    echo '<br>begin HTML[';
    echo  $html;
    echo '<br>]end html ';
}
echo '</body></html>';

// Output
// cURL error number:0
// cURL error:

If the pages are really ajax based meaning the information that you need to scrape is loaded or shown through javascript execution, you will need another approach. You would need to automate with a real browser. You can go the Selenium route which can be written in a number of languages or use CasperJS with Javascript as the programming language.



Source: http://stackoverflow.com/questions/24611046/scraping-data-in-dynamic-sites

Wednesday, 20 August 2014

What is the right way of storing screen-scraping data?


i'm working on a web site. it is scraping product details(names, features, prices etc.) from various web sites, processing and displaying them. i'am considering to run update script on each day and keep data fresh.

    scrape data
    process them
    store on database
    read(from db) and display them

i'am already storing all the data in a sql schema but i'm not sure. After each update, all the old records are vanishing. if the scraped new data comes corrupted somehow, there is nothing to show.

so, is there any common way to archive the old data? which one is more convenient: seperate sql schemas or xml files? or something else?

Source: http://stackoverflow.com/questions/13686474/what-is-the-right-way-of-storing-screen-scraping-data

Scraping dynamic data


I am scraping profiles on ask.fm for a research question. The problem is that only the top most recent questions are viewable and I have to click "view more" to see the next 15.

The source code for clicking view more looks like this:

<input class="submit-button-more submit-button-more-active" name="commit" onclick="return Forms.More.allowSubmit(this)" type="submit" value="View more" />

What is an easy way of calling this 4 times before scraping it. I want the most recent 60 posts on the site. Python is preferable.

You could probably use selenium to browse to the website and click on the button/link a few times. You can get that here:

    https://pypi.python.org/pypi/selenium

Or you might be able to do it with mechanize:

    http://wwwsearch.sourceforge.net/mechanize/

I have also heard good things about twill, but never used it myself:

    http://twill.idyll.org/



Source: http://stackoverflow.com/questions/19437782/scraping-dynamic-data

Web Scraping data from different sites


I am looking for a few ideas on how can I solve a design problem I'm going to be faced with building a web scraper to scrape multiple sites. Writing the scraper(s) is not the problem, matching the data from different sites (which may have small differences) is.

For the sake of being generic assume that I am scraping something like this from two or more different sites:

    public class Data {
        public int id;
        public String firstname;
        public String surname;
        ....
    }

If i scrape this from two different sites, I will encounter the situation where I could have the following:

Site A: id=100, firstname=William, surname=Doe

Site B: id=1974, firstname=Bill, surname=Doe

Essentially, I would like to consider these two sets of data the same (they are the same person but with their name slightly different on each site). I am looking for possible design solutions that can handle this.

The only idea I've come up with is scraping the data from a third location and using it as a reference list. Then when I scrape site A or B I can, over time, build up a list of failures and store them in a list for each scraper so that it can know (if i find id=100 then i know that the firstname will be William etc). I can't help but feel this is a rubbish idea!

If you need any more info, or if you think my description is a bit naff, let me know!

Thanks,

DMcB


Source: http://stackoverflow.com/questions/23970057/web-scraping-data-from-different-sites

Scrape Data Point Using Python


I am looking to scrape a data point using Python off of the url http://www.cavirtex.com/orderbook .

The data point I am looking to scrape is the lowest bid offer, which at the current moment looks like this:

<tr>
 <td><b>Jan. 19, 2014, 2:37 a.m.</b></td>
 <td><b>0.0775/0.1146</b></td>
 <td><b>860.00000</b></td>
 <td><b>66.65 CAD</b></td>
</tr>

The relevant point being the 860.00 . I am looking to build this into a script which can send me an email to alert me of certain price differentials compared to other exchanges.

I'm quite noobie so if in your explanations you could offer your thought process on why you've done certain things it would be very much appreciated.

Thank you in advance!

Edit: This is what I have so far which will return me the name of the title correctly, I'm having trouble grabbing the table data though.

import urllib2, sys
from bs4 import BeautifulSoup

site= "http://cavirtex.com/orderbook"
hdr = {'User-Agent': 'Mozilla/5.0'}
req = urllib2.Request(site,headers=hdr)
page = urllib2.urlopen(req)
soup = BeautifulSoup(page)
print soup.title



Here is the code for scraping the lowest bid from the 'Buying BTC' table:

from selenium import webdriver

fp = webdriver.FirefoxProfile()
browser = webdriver.Firefox(firefox_profile=fp)
browser.get('http://www.cavirtex.com/orderbook')

lowest_bid = float('inf')
elements = browser.find_elements_by_xpath('//div[@id="orderbook_buy"]/table/tbody/tr/td')

for element in elements:
    text = element.get_attribute('innerHTML').strip('<b>|</b>')
    try:
        bid = float(text)
        if lowest_bid > bid:
            lowest_bid = bid
    except:
        pass

browser.quit()
print lowest_bid

In order to install Selenium for Python on your Windows-PC, run from a command line:

pip install selenium (or pip install selenium --upgrade if you already have it).

If you want the 'Selling BTC' table instead, then change "orderbook_buy" to "orderbook_sell".

If you want the 'Last Trades' table instead, then change "orderbook_buy" to "orderbook_trades".

Note:

If you consider performance critical, then you can implement the data-scraping via URL-Connection instead of Selenium, and have your program running much faster. However, your code will probably end up being a lot "messier", due to the tedious XML parsing that you'll be obliged to apply...

Here is the code for sending the previous output in an email from yourself to yourself:

import smtplib,ssl

def SendMail(username,password,contents):
    server = Connect(username)
    try:
        server.login(username,password)
        server.sendmail(username,username,contents)
    except smtplib.SMTPException,error:
        Print(error)
    Disconnect(server)

def Connect(username):
    serverName = username[username.index("@")+1:username.index(".")]
    while True:
        try:
            server = smtplib.SMTP(serverDict[serverName])
        except smtplib.SMTPException,error:
            Print(error)
            continue
        try:
            server.ehlo()
            if server.has_extn("starttls"):
                server.starttls()
                server.ehlo()
        except (smtplib.SMTPException,ssl.SSLError),error:
            Print(error)
            Disconnect(server)
            continue
        break
    return server

def Disconnect(server):
    try:
        server.quit()
    except smtplib.SMTPException,error:
        Print(error)

serverDict = {
    "gmail"  :"smtp.gmail.com",
    "hotmail":"smtp.live.com",
    "yahoo"  :"smtp.mail.yahoo.com"
}

SendMail("your_username@your_provider.com","your_password",str(lowest_bid))

The above code should work if your email provider is either gmail or hotmail or yahoo.

Please note that depending on your firewall configuration, it may ask your permission upon the first time you try it...



Source: http://stackoverflow.com/questions/21217034/scrape-data-point-using-python

Tuesday, 5 August 2014

Compensation to Outsource Data Entry Work

The data input is used to transform data into information. They entered data into the computer, the keyboard entry, scanning and voice recognition includes. The volume and the critical services in enterprise and desktop world needs more and more in this electronic age has become. It is an important task for any successful company in the long run.

Data entry is the center of every business and even though it may seem easier to manage and manipulate it many processes that must be addressed systematically. It is a characteristic of such an undertaking should be properly handled to make your business a successful endeavor. These services cover most business and professional activities, including:

* Online Entry

* Out of entry

* Input Image

* Document Input

* Book Entry

* Entry Insurance Claim

* Catalog Entry

* The text and numeric input

* Application forms invoice

* Documents Legal entry

* Reports Corporate entry

Data entry work is very long and tiring, so the best option is therefore to support the provision of outsourcing companies. In the competitive world of today, all companies have regularly updated information and data certainly help advance your competitor. In today's market, solutions capture data for different types of businesses are at very competitive prices. A growing number of companies turn to outsourcing services.

Advantages of Data Entry Outsourcing:

* So that you can concentrate on your core business

* It lowers the capital costs of infrastructure

* Competitive rates are as low as 60%

* Removal of management headache

* Improved employee satisfaction with higher value jobs

* Use the latest standards and new technologies

* Fast turnaround and high quality

* A better use of available resources in the competitive world

* High-speed and low-cost communication

* Line of data from anywhere

Data Entry Services provided by outsourcing companies offer various services under this. No matter what kind of services you want, everything is through this outsourcing services enable companies to support. Increase your business by outsourcing work. If you are looking for data entry specialists in subcontract work then we will certainly meet your needs.

Source:http://ezinearticles.com/?Compensation-to-Outsource-Data-Entry-Work&id=3486446

Thursday, 31 July 2014

Automated SEO Tools Can Keep You Out of the SERPs

Every day, thousands of newcomers enter the world of internet marketing. They join all of the popular forums, follow popular advice, and purchase a bunch of tools to automate the process. While all three of these things are full of potential problems and pitfalls, it is the automated tools that have the potential to cause the greatest harm.

Why do People Buy Automated SEO Tools?

Automated SEO tools make some very grand promises. First, they promise to eliminate all of the hard work and effort that is needed to succeed with making money online. Next, they promise to give you an "edge" over your competitors. Finally, they promise to do it all for less than outsourcing.

But most of these tools don't work properly, meaning that any money you spent is money wasted. If you can't use it, you can't get any sort of return on your investment.

The few that do work properly, though, typically use techniques that are frowned upon by the search engines. They violate the terms of service, as well as commonly accepted web etiquette.

For instance, Scrape Box is a tool that is designed to find blogs on which you can comment and generate back links. It's a valuable tool if you're using it to automate the finding of relevant blogs. After that, though, it can only get you in trouble.

Just like most of these tools, Scrape Box is going to guide you through the process of creating a generic comment template. It will then assist you with "spinning" that comment, so that you can have hundreds (or even thousands) of "unique" versions.

What ends up happening, though, is that you end up with comments that resemble gibberish more than anything else. The tool then pushes these comments to blogs with links back to your website. And that's when everything goes downhill.

Search Engine Algorithms vs Automated SEO Tools

The most recent batch of algorithm updates, like Panda and Penguin, are designed to help Google better identify spam that is used for nothing other than search engine optimization. When you use Scrape Box to build and publish your content, you're spamming the web.

When Google's spiders crawl the content on these blogs and identify them as spam, they'll also note the fact that a link was sent back to your site. If you have too many of these, it will raise a red flag and your site may end up deindexed.

If you're lucky, you won't be penalized that harshly. Instead, all of your links will end up devalued. That isn't much better, though, because then the original cash investment in the tool, as well as all of the time you spent setting everything up, will be for nothing.

All of the popular SEO automation tools focus on spamming the web to build back links. This includes:

    Tools designed to automate blog comments

    Tools designed to automate article directory submissions

    Tools designed to submit your site to social bookmarking directories

    Tools designed to spin your content for uniqueness

The end results are disappointing, at best. You spend money on a tool that pushes out thousands of back links that never really help your SEO campaign. Ultimately, your site develops a back link profile that is so damaged that no amount of hard, legitimate work can ever overcome it.

Slow and Steady Wins the Race

The allure and appeal of these tools is simple to understand. They eliminate all of the hard work that would go into building a real back link profile. The problem, though, is easy to understand.

If you were to perform these tasks manually it would take a long time. But the quality of the back links you receive will far outweigh anything the automated tools could do for you.

Sure, you might not be able to manually generate a thousand back links in one day. But Google knows that, and when you do so you immediately set off a red flag. That's not how you build a solid, long lasting ranking.

By handling each step in your SEO campaign manually you will build a more natural and diverse back link footprint over time. Your rankings won't come quickly, but they'll stick for a very long time.

Source: http://ezinearticles.com/?Automated-SEO-Tools-Can-Keep-You-Out-of-the-SERPs&id=7427357

Thursday, 10 July 2014

Advantages of Medical Records Scanning

Medical records contain important and sensitive information regarding patients, such as birth and family records, illness, and other personal matters. Most hospitals have a certain section where doctors keep these files. They process many papers every day so they have to organize everything to avoid mistakes. There are instances, however, when calamities and accidents strike that lead to the loss of files. Papers are hard to recover once they get wet or burned. This is why many hospitals and medical facilities look for alternatives in keeping medical records.

Technology lets people make digital copies, which is useful for keeping different types of files. This adds to the flexibility of medical records as you can save photos and videos unlike the traditional word texts. Many hospitals use Electronic Medical Records or EMR to convert old documents to a digital format. This reduces the clutter in record sections as you only need a computer to keep different files. It also improves the efficiency of their staff as they do not have to spend significant time looking for a specific record.

Here are some of the advantages of medical records scanning:

Saves Space

Most hospitals need an entire room to keep all the records of their patients. Digital records, on the other hand, only require a corner of the room. Digital copies remove all the bulk in an area and create additional space. It is like shrinking an entire room to a hard drive by using medical records scanning. This makes the area look bigger and spacious. People can even use the new area for a more beneficial purpose.

Security

A disadvantage of keeping physical records is the risk of theft. The hospital is a busy place and many people go in and out every day. You cannot monitor everyone so it is hard to find the real culprit. This might cause information leak, exposing the patient's confidential information. The benefit of having digital copies is it has a system that monitors people who access it. It records what documents you take, edit, and delete. This increases the security and offers a peace of mind to your patients. You do not have to worry about losing the files either because they have a backup, making file recovery easy.

Lower Labor Costs

Many devices can perform tasks that require many people. This reduces the need of employing and paying more people to do the same job. It also saves time because you do not have to screen all the applicants. You can allot the money you save from labor costs for another thing.

Fewer Mistakes

Digital systems perform a task according to what you input so there is no room for mistakes. It ensures that all files are processed correctly. It saves you from problems due to paperwork mistakes. The hospital is a delicate environment and one mistake can risk the life of a patient. medical records scanning is a great way to improve the working process in hospitals and medical facilities. It reduces paperwork, increases security, and adds space. Try it now to see its benefits.

Source:http://ezinearticles.com/?Advantages-of-Medical-Records-Scanning&id=7466788